안전놀이터



Insider's Guide: F1's Engine Rules
How a Formula 1 Power Unit Works

Equation 1 is at the bleeding edge of motor innovation and its most recent power plant is one of the game's generally intricate yet. 안전놀이터

Truth be told, the current motors are so confounded they need to go through a pre-start routine including workstations, far off activities and a lot of smart designers before they can be kicked into life.

Winning in F1 is tied in with executing a profoundly tuned arrangement. A similar applies to poker. See where your strategy can get you. Click here to begin your course of action.

18+, New UK players just, min £10 store, Full T&Cs Apply, begambleaware.Org, Play Responsibly

What is in a F1 power unit?

First of all, an advanced F1 motor is not generally called that, it's known as a 'power unit' - and that is on the grounds that it's a cross breed. It comprises of a petroleum gas powered motor and electric engines controlled by an Energy Recovery System. (Emergency rooms).

When presented in 2014, they were reprimanded for their absence of commotion contrasted with the well known ear-shaking V8 and V10 beasts of the past, however these are probably the most impressive and proficient power units in Grand Prix history.

Max Verstappen, Red Bull Racing RB16, Valtteri Bottas, Mercedes F1 W11, Lewis Hamilton, Mercedes F1 W11, Lando Norris, McLaren MCL35, Alex Albon, Red Bull Racing RB16, and the remainder of the field away toward the beginning © Motorsport.Com Max Verstappen, Red Bull Racing RB16, Valtteri Bottas, Mercedes F1 W11, Lewis Hamilton, Mercedes F1 W11, Lando Norris, McLaren MCL35, Alex Albon, Red Bull Racing RB16, and the remainder of the field away toward the beginning
Max Verstappen, Red Bull Racing RB16, Valtteri Bottas, Mercedes F1 W11, Lewis Hamilton, Mercedes F1 W11, Lando Norris, McLaren MCL35, Alex Albon, Red Bull Racing RB16, and the remainder of the field away toward the beginning

Photograph by: Steven Tee/Motorsport Images

How much drive does a F1 control unit produce?

The all out power yield from the joined petroleum and electric components is around 1,000bhp - fundamentally higher than a typical street vehicle. The petroleum motor runs at 15,000rpm - once more, essentially in excess of a street vehicle.

This all means a F1 vehicle can cover 0-60mph in around 2.6 seconds and top out at around 230mph, contingent upon how much drag it is running. At the point when BAR (which by means of Honda and Brawn GP in the end became Mercedes) stripped its vehicle of however much drag as could reasonably be expected, it hit 246.9mph on the Bonneville Salt Flats in 2006.

How kind of petroleum motor treats power unit use?

The motor is a four-stroke 1.6-liter super V6. It is intended to a severe arrangement of aspects and material impediments, with the chambers organized in a 90-degree 'V' design and two channel and exhaust valves per chamber.

The turbocharger works by utilizing a blower to pressure charge the motor. It's driven via wind current from the vehicle's exhaust, by means of a turbine that is associated with the power source framework.

For the individuals who get motors, the pressure proportion for every chamber should be no higher than 18, the fuel strain in the injectors is 500barG or beneath and the fuel mass stream is something like 100kg/h, downsizing at lower fires up.

That fuel mass stream is critical - in light of the fact that it fundamentally implies how much petroleum going into the motor is restricted, confining the fires up and the power that can be created and empowering the groups to plan more effective motors.

F1 Fuel in sign © Motorsport.Com F1 Fuel in sign
F1 Fuel in sign

Photograph by: Andrew Hone/Motorsport Images

How fuel treats take?

The vehicles use fuel comprised of mixtures ordinarily found in business energizes, with no particular power-supporting substance compounds. These days, at least 10% of the fuel should include progressed economical ethanol.

The vehicles purportedly go through around 135 liters of fuel during a race, which is supposed to be a third short of what they did with the more parched V8s of old.

How treats Energy Recovery System (ERS) do?

The ERS recuperates energy from the exhaust and brakes and converts it into power to either drive the electric engines straightforwardly or be put away in a battery for later use as an additional a power help.

The MGU-K (Motor Generator Unit - Kinetic) is an electric engine connected to the motor driving rod. In regenerative mode, it fills in as a generator, easing back the vehicle through 'motor slowing down' (lessening the utilization of the customary brakes) and delivering power to charge the battery. In drive mode, it turns into an engine, utilizing that power to drive the wheels for additional speed increase.

The framework is simply permitted to create a specific measure of energy per lap - around 33 seconds worth of greatest power help - yet it can store twofold that sum, so a group can be key and save and use energy at various occasions.

The MGU-H (Motor Generator Unit - Heat) is more confounded and is utilized in blend with the super, which itself works by utilizing fumes gases to turn a turbine that compresses the motor.

As a generator, the MGU-H gives obstruction that dials back the super twist - which assists with forestalling the super making a lot of lift at high power - and transforms that energy into power that is put away in the battery.

As an engine, it is utilized to keep the super turning when the driver isn't on the choke, diminishing super slack and smoothing the conveyance of force. This is more proficient than the fuel-controlled other options.

Essentially, power created by the MGU-H can be utilized to control the MGU-K straightforwardly - so it can add to the 33-second breaking point greatest that can be utilized from put away energy each lap. That implies the greater power the groups can create from the MGU-H, the more they can utilize their electric power support.

The entire framework, including the various parts and ancillaries, should be no lighter than 150kg, with the capacity part making up between 20-25kg of that.

MGU-H © Motorsport.Com MGU-H
MGU-H

Photograph by: Magneti Marelli

How much power do the electric engines create?

The greatest power the MGU-K can create is 120kW - which compares to around 160bhp. To forestall electric controlled super beginnings, however, its utilization is confined toward the beginning of the rush to until the vehicle has reached 100km/h.

The MGU-K should gauge something like 7kg and can turn up to 50,000rpm, with a greatest force of 200Nm. The MGU-H can be 3kg lighter and can turn up to a gigantic 125,000rpm.

How is that power conveyed?

The power is in the possession of the driver - and the installed PC. Groups foster motor guides set up to convey the electric power in various ways, and the drivers just need to pick either them and let the vehicle wrap up.

Is the electric engine risky?

The ERS is a truly high voltage piece of pack. It works up to 1000V so can radiate an extremely perilous electric shock.

To diminish hazard, high voltage links are shaded orange and have a voltage removed when disengaged. The principle energy stockpiling nook, MGU-H and MGU-K and all high voltage intersection boxes are set apart with risk notice signs.

The ERS can be closed down in more ways than one and to show its working and protection state it is fitted with status lights on top of the airbox, gleaming green when protected and red when not.

In 2019, subsequent to resigning from the Bahrain Grand Prix, Daniel Ricciardo was told to "bounce from the vehicle" without contacting it after the red light came in and his Renault group proclaimed it "electrically perilous." Luckily, that doesn't occur regularly.

How would they begin the vehicles?

The group need to connect an outside starter gadget to the vehicle to turn over the petroleum motor in the carport, pit path and on the matrix. The motors are fitted with hostile to slow down frameworks to forestall the motor removing when a driver lets completely go.

Haas F1 mechanics on the lattice © Motorsport.Com Haas F1 mechanics on the framework
Haas F1 mechanics on the lattice

Photograph by: Andy Hone/Motorsport Images

What number of force units would a group be able to use in a season?

Quite a while back there were no limitations in motor use and groups burned through millions delivering extraordinary 'qualifying spec' motors which were adjusted as far as possible however would just last a small bunch of laps prior to firing up themselves into accommodation.

Presently, to minimize expenses, the quantity of force units permitted in a season is confined, with every driver permitted something like…

- three motors three turbochargers-three MGU-H-three MGU-K-two energy stores-two control hardware eight arrangements of motor exhaust frameworks
Groups are permitted to go past their assigned number however will be given lattice position punishments each time they do - so power units are presently worked to be more hearty than before.

How does the FIA ensure the power units are lawful?

To limit the odds of cheating, electrical DC sensors from the FIA's assigned providers are connected to various pieces of the ERS and there is a force sensor fitted to the MGU-K.

All vehicles run a similar high-pressure fuel siphon, produced by a solitary provider designated by the FIA World Motor Sport Council, and two fuel stream meters are situated in the gas tank to screen stream rates.

To keep mind the petroleum motor activity, the power yield shaft and every driveshaft are fitted with a confirmed force estimation framework, and tension and temperature sensors are fitted for the fuel injectors.

Ferrari SF1000 motor detail © Motorsport.Com Ferrari SF1000 motor detail
Ferrari SF1000 motor detail

Photograph by: Mark Sutton/Motorsport Images

What's to come?

The current units won't keep going for ever - on the grounds that F1 is as of now molding plans for the future.

There is currently a 'freeze' on these plans - which means groups are not generally permitted to foster them. That is to save time and spending plan to foster another unique, more industry-applicable crossover motor to be presented in 2025.

The new guidelines will zero in on undeniable degrees of ecological susta